Still related to your computer beep code, now I want to share the BIOS beep codes based on your motherboard’s manufacturer. I’ll discuss American Megatrends (AMI) first.

Also called AMIBIOS, there are several beep codes which give general information for IT Troubleshooter or IT Support. Here are the list

• 1 Beep: A single beep from an AMI based BIOS means there has been a memory refresh timer error. The solution is often to replace the RAM in the computer.
• 2 Beeps: Two beeps means there has been a parity error in base memory. This is an issue with the first 64KB block of memory in your RAM. The solution is usually to replace the memory.
• 3 Beeps: Three beeps means there has been a base memory read/write test error. Replacing the RAM usually solves this AMI beep code.
• 4 Beeps: Four beeps means that the motherboard timer is not working properly. A hardware failure with an expansion card or the motherboard itself could be the cause of this beep code.
• 5 Beeps: Five beeps means there has been a processor error. A damaged expansion card, the CPU, or the motherboard could be prompting this AMI beep code.
• 6 Beeps: Six beeps means that there has been an 8042 Gate A20 test error. This beep code is usually caused by an expansion card that has failed or the motherboard that is no longer working.
• 7 Beeps: Seven beeps indicates a general exception error. This AMI beep code could be caused by an expansion card problem, a motherboard hardware issue, or a damaged CPU. Replacing the faulty hardware usually fixes the cause of this beep code.
• 8 Beeps: Eight beeps means that there has been an error with the display memory. This beep code is usually caused by a faulty video card. Replacing the video card usually clears this up.
• 9 Beeps: Nine beeps means that there has been an AMIBIOS ROM checksum error. Literally, this would indicate an issue with the BIOS chip on the motherboard. However, since replacing a BIOS chip is sometimes impossible, this AMI BIOS issue is usually corrected by replacing the motherboard.
• 10 Beeps: Ten beeps means that there has been a CMOS shutdown register read/write error. This beep code is usually caused by a hardware issue with the AMI BIOS chip. A motherboard replacement will usually solve this problem, although it could be caused by a damaged expansion card in rare situations.
• 11 Beeps: Eleven beeps means that the cache memory test has failed. Some piece of failing hardware is usually to blame for this AMI BIOS beep code.

That’s what I can share for now, tomorrow I’ll let you know the info for other manufacturers.

Source: www.ami.com